Size Guide

All of our measurements are taken from the inside of the frame, meaning all measurements listed are to take, for example a 12×10 frame fits a 12×10 insert.

When measuring for a frame, your insert should be the same size as the back of the frame, as shown here.

All our measurements are listed Height x Width, on a Portrait basis. However, they can be easily turned on their side to become Landscape; if so, keep in mind to invert the measurements to Width x Height.

With the exception of the strut, all of our Plain Back frames are measured the same way as our Strut Back frames.

When measuring for a Plain Back frame, your insert should be the same size as the back of the frame, as shown here.

As with Plain Back frames, all our measurements are listed Height x Width, on a Portrait basis. Again, they can be easily turned on their side to become Landscape; if so, keep in mind to invert the measurements to Width x Height.

On all of our product pages, in the photo gallery, you will find a moulding diagram (see left). This diagram will provide all of the measurements for that specific moulding, including:

A – Moulding Depth
B – Moulding Width
C – Rebate Depth
D – Rebate Width

There will also be an indicator showing the front of the moulding. These measurements can be used to calculate the overall dimensions of your final frame.